Jeans have been a part of our wardrobe for almost 150 years, and people have been doing online shopping in India for jeans for a long time. They’ve grown commonplace; everyone is seen wearing them! So, why is it so tough to locate a pair of jeans that are a good fit?

It is possible for little variations in sizes and materials as well as dimensions and treatment to create a significant difference in the way two pairs of jeans appear on you. And that’s before taking into account your own characteristics and body shape.

 Jeans were considered workwear in the olden days since they were worn on a daily basis and needed to be sturdy. It didn’t matter how it appeared in the end. That meant that jeans had to accommodate every body shape, and the fits had to be liberally cut. When blue jeans became a popular business and fashion item, designers started experimenting with different fits to achieve different appearances. Patternmakers are now working on creating strategies and methods of stitching that will allow them to produce the ideal fit.

Jeans are often referred to as “a second skin.” In addition, since we wear our jeans almost all of the time, they suffer from a considerable amount of wear and tear—and it is generally necessary to spend a significant amount of money to get into a nice pair of jeans.

The Four Characteristics That Make Or Break A Fit

While it comes to online shopping for jeans, we’re all too frequently influenced by fashion, what our friends are wearing, or even a specific fabric or appearance when we’re out. Instead, search for jeans that are tailored to your specific body type.

  1. The Shape Of The Legs

The form of the leg is what determines the various kinds of fits available to you. It is calculated by three measurements- the thigh, the knee, and the aperture of the leg. All of the measurements are taken with the jeans laying flat, and the results are then multiplied by two.

This is measured at a right-side angle immediately below the crotch, at the top of the leg, which is known as the thigh. If you want to obtain the entire width of the thigh, you must incorporate a little fabric from the rear of the leg, rather than just the width of the front of the leg, while cutting the cloth. The inseam is measured from the crotch to the knee, which is 35 cm (or 14 inches) down. The leg opening is defined as the distance between the hem to the bottom of the shoe.

Therefore, in order to discover jeans that are both comfortable and fashionable, you cannot just shop for jeans based on the fit that they are labelled with.

You must either try them on or carefully measure them against a pair of jeans you currently possess before making your final decision.

The exception would be a fit that you are already familiar with, although even in that case, there may be differences across manufacturing runs, materials, and washes.

2.  The Rise

The rise is defined as the distance between the crotch joint and the top of the waistband of a pair of pants. That implies you’ve got a front rise as well as a rear rise on your tee. The rear rise of jeans is curved, as opposed to the back rise of trousers and slacks. This implies that it extends all the way around to the front of the pants. It is because of this that jeans have a figure-hugging fit.

The rise of the jeans is essential since it defines where the pants will sit on your hips and thighs. The rise should follow the curves of your body to ensure that you obtain a comfortable fit that also looks nice on your body.

In general, there are four types of rises: low rise, mid-rise, high rise, and drop crotch. In addition to the length of the rise, the angle of the yoke should be taken into consideration, as it affects the curve of the back rise and the length of the rise.

3. The Length

 For the most part, you should keep the length of your jeans at a constant length, with the exception of the break (where the legs stop), which should be at the same length as your feet. When worn without shoes, the front of the hem will lay on top of your instep, while the rear of the hem will rest on the carpet.

Jeans length has mainly been a matter of personal choice in recent years due to fashion trends such as cut legs, cuffing, and stacked denim.

Nonetheless, the length of your jeans has an impact on how they seem on you—and you may utilise this to your advantage to create optical illusions.

4.  Fabric

The term “rigid denim” refers to denim that has historically been manufactured entirely of cotton. Stretch denim, on the other hand, is becoming more common among fashion denim manufacturers as fits have been slimmer over the last couple of decades, and spinning technology has advanced.

Anyone who has worn denim knows that the main benefit of having stretch in denim is that the pants become much more comfortable as a result of the stretch. Another frequent issue is that stretch denim becomes sagging after a few washes.

Stretch denim is here to stay, regardless of whether you like it or not. Denim purists are certain that stretch denim is inferior to rigid denim in terms of aesthetics; nevertheless, the spinning industry is currently producing high-stretch denim that is aesthetically more or less similar to rigid.